The inspection access panel is composed of aluminum profiles with water-repellent impregnated plasterboard sheets of 12.5mm, 15mm, or 25mm, and two or more snap locks.
The two frames of the access panel consist of four profiles firmly welded together using a special process.
Starting from the 300x300 mm size, the access panel is supplied with one or more safety cables with a carabiner to be reattached after each door opening.
A 1.75 mm gap remains between the frame and the door, equipped with a profiled gasket that prevents light from passing through between the frame and the door.
The invisible snap locks allow the inspection access panel to open with a simple press.
Versions
- Variant 1 "Above the frame": the aluminum profile is flush with the plasterboard. The tiles are mounted above the profile.
- Variant 2 "Recessed": the aluminum profile is higher than the plasterboard. The tiles are recessed within the profile.
A and B = internal dimensions of the outer frame
C = frame thickness
D = 28 mm
E = 40 mm
The inspection access panel is adjusted according to the size of the tiles. Therefore, the tile size and grout width are required, from which A and B are determined.
Dimensions D and E remain unchanged. Dimension C corresponds to the thickness of the cladding.
Particular advantages of our system:
-
System designed to prevent cladding damage during door opening
-
Reduced delivery times
-
Sturdy aluminum profiles
-
Technically proven solution
-
Quick installation on walls
-
Removable door ready to be painted
-
Side opening for wall application
-
Consult our technical office to verify proper functioning before applying any finishing material