The floor access cover system MA-BS is made of 2.5 mm stainless steel.
The tray depth is 50 mm and the installation height is only 75 mm.
The frame is equipped with a circumferential, frost- and water-resistant special sealing joint, which is largely odor-and water-tight- the frame is set in concrete on grade.
Subsequently, the tray can be filled and inserted into the frame. The cover is fixed on the frame on 2 corner points.
The opening is helped by the high-quality gas pressure springs in a way that the access cover can be opened and closed by one single person.
Safety is guaranteed by a fall protection device.
The tray can be filled with paving, tiles, concrete, artificial resin, granite, terrazzo tiles, wood and hard floor covering orother materials.
Frame external dimension: Clear opening + 101/124 mm
- With frost- and weather-resistant special sealing joints
- With fixing anchors for safe support
- Amost invisible when installed
- Tray depth is 50 mm
- With additional reinforcement cross-braces
- Power-assisted and fall-preventing opening
- Quality own production
Load
Up to Class B125 according to EN 124 standard
Application Area
For covers that are opened frequently and without particular effort, where fire protection is required
Opening and Installation
Equipped with a tightening/lifting key and installation manual.
Installation must be carried out professionally, paying particular attention to ensuring the special gasket fits tightly to the frame profile.